TITLE

Laser deposition holds promise, needs development

AUTHOR(S)
Hastie, John W.; Chrisey, Douglas B.
PUB. DATE
September 1998
SOURCE
Laser Focus World;Sep98, Vol. 34 Issue 9, p18
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
Provides information on the application of pulsed-laser deposition (PLD) technology in the production of high-quality ceramic thin films. Workshop held to discuss barriers to full industrial use of PLD; Companies that manufacture PLD products.
ACCESSION #
1100959

 

Related Articles

  • Fabrication and photosensitivity of AgInSe[sub 2]/III–VI isotypic heterojunctions. Rud’, V. Yu.; Gremenok, V. F.; Rud’, Yu. V.; Bekimbetov, R. N.; Bodnar’, I. V. // Semiconductors;Oct99, Vol. 33 Issue 10, p1097 

    AgInSe[sub 2] thin films on glass substrates have been prepared by pulsed laser deposition. Rectifying heterojunctions with a pronounced photovoltaic effect have been fabricated for the first time by placing such films in optical contact with layered III-VI (InSe, GaSe) semiconductors. The...

  • Critical dimensions for YBCO islands grown by pulsed laser deposition. Gilmore, C.M.; Kim, J. // Applied Physics A: Materials Science & Processing;2002, Vol. 75 Issue 5, p565 

    Islands of constant width at half maximum of approximately 100 nm have been observed during the pulsed laser deposition of films of nominal thickness from 0.7 to 3.0 nm of the material YBa[sub 2] Cu[sub 3] O[sub 7-δ] (YBCO) on substrates of SrTiO[sub 3] . The critical island dimensions of...

  • Production of metal oxide thin films by pulsed arc molecular beam deposition. Rexer, Eric F.; Wilbur, Donald B.; Mills, Jeffrey L.; Mills, Jeffrey L; DeLeon, Robert L.; Garvey, James F. // Review of Scientific Instruments;May2000, Vol. 71 Issue 5 

    Deposition for the first time of titanium oxide, cerium oxide, and tin oxide thin films by reactive pulsed arc molecular beam deposition is reported. To produce these thin films, oxygen gas was pulsed between a pair of electrodes situated within a vacuum chamber. A 20 μf storage capacitor was...

  • Improved uniformity of multielement thin films prepared by off-axis pulsed laser deposition... Cillessen, J.F.M.; de Jong, M.J.M.; Croize, X. // Review of Scientific Instruments;Sep96, Vol. 67 Issue 9, p3229 

    Describes the improved uniformity of a multielement thin films prepared by off-axis pulsed laser deposition using a heater design. Components of the heater; Advantage of the system; Application of the heater for the deposition of multielement films; Modeling of the thickness profile.

  • Laser-deposition technique grows nitride LEDs easily. Brinkmann, Uwe // Laser Focus World;Aug2002, Vol. 38 Issue 8, p53 

    Assesses the development of a modified pulse-laser deposition (PLD) technique to generate layers of thin film devices. Advantages of the technique over well-established technique; Interest in group-III nitride thin film devices; Methods in analyzing indium aluminum gallium nitride films.

  • Fracture Toughness of Diamond-Like Carbon Films. Hou, Q. R.; Gao, J. // Modern Physics Letters B;2/28/2001, Vol. 15 Issue 4/5, p157 

    Diamond-like carbon films were deposited on silicon (111) substrates at different temperatures using a pulsed-laser deposition method. Vickers indentation was used to measure the fracture toughness of the deposited diamond-like carbon films. It is found that diamond-like carbon films deposited...

  • Laser deposition of YBa[sub 2]Cu[sub 3]O[sub 7-delta] films using a pulsed oxygen source. Gupta, A.; Hussey, B.W. // Applied Physics Letters;3/18/1991, Vol. 58 Issue 11, p1211 

    Discusses the growth of YBCO thin films by pulsed laser deposition in a low-pressure background using a pulsed, high intensity jet of oxygen. Provision of an oxygen source by a pulsed molecular beam valve; Use of in situ analysis techniques such as reflection-high energy electron diffraction,...

  • Laser deposition of CdS/Y-Ba-Cu-O heterostructures. Shi, L.; Hashishin, Y.; Dong, S.Y.; Zheng, J.P.; Kwok, H.S. // Applied Physics Letters;9/9/1991, Vol. 59 Issue 11, p1377 

    Examines the use of pulsed laser deposition to grow high-quality Y-Ba-Cu-O (YBCO) and CdS thin films sequentially on MgO. Suitability of a temperature window for CdS deposition on YBCO; Transition temperature of the heterostructure; Determination of the degradation.

  • In situ pulsed laser deposition of superconducting Ba[sub 1-x]K[sub x]BiO[sub 3] thin films. Moon, B.M.; Platt, C.E.; Schweinfurth, R.A.; Van Harlingen, D.J. // Applied Physics Letters;10/7/1991, Vol. 59 Issue 15, p1905 

    Investigates in situ pulsed laser deposition of superconducting Ba[sub 1-x]K[sub x]BiO[sub 3] thin films. Determination of the onset transition temperature and zero resistance temperature; Direction of film growth; Characterization of the thin films.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics