TITLE

Responses of glassy structure and properties to pressure and devitrification

AUTHOR(S)
Wang, R.J.; Li, F.Y.; Wang, J.F.; Wang, W.H.
PUB. DATE
October 2003
SOURCE
Applied Physics Letters;10/6/2003, Vol. 83 Issue 14, p2814
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The pressure (up to 2 GPa) and devitrification-induced properties and structural changes in glasses studied by an ultrasonic method are summarized. The pressure has a larger effect on the longitudinal mode for a crystallized state and on the shear mode for a glassy state in oxide glasses. The crystallization significantly affects the longitudinal mode for oxide glasses and the shear mode for metallic glasses. The different effects are contributed to their different microstructures in short-range order for different glasses. © 2003 American Institute of Physics.
ACCESSION #
10964889

 

Related Articles

  • Primary and secondary relaxations in supercooled eugenol and isoeugenol at ambient and elevated pressures: Dependence on chemical microstructure. Kaminska, E.; Kaminski, K.; Paluch, M.; Ngai, K. L. // Journal of Chemical Physics;4/28/2006, Vol. 124 Issue 16, p164511 

    Dielectric loss spectra of two glass-forming isomers, eugenol and isoeugenol, measured at ambient and elevated pressures in the normal liquid, supercooled, and glassy states are presented. The isomeric chemical compounds studied differ only by the location of the double bond in the alkyl chain....

  • 3-D microstructuring inside photosensitive glass by femtosecond laser excitation. Masuda, M.; Sugioka, K.; Cheng, Y.; Aoki, N.; Kawachi, M.; Shihoyama, K.; Toyoda, K.; Helvajian, H.; Midorikawa, K. // Applied Physics A: Materials Science & Processing;2003, Vol. 76 Issue 5, p857 

    We show that a femtosecond laser enables us to produce true three-dimensional (3-D) microstructures embedded in a photosensitive glass, which has superior properties of transparency, hardness and chemical and thermal resistances. The photosensitivity arises from the cerium in the glass. After...

  • Microstructures and mechanical properties of tungsten wire/particle reinforced Zr[sub 57]Nb[sub 5]Al[sub 10]Cu[sub 15.4]Ni[sub 12.6] metallic glass matrix composites. Choi-Yim, Haein; Schroers, Jan; Johnson, William L. // Applied Physics Letters;3/18/2002, Vol. 80 Issue 11, p1906 

    Tungsten wire or particle reinforced metallic glass matrix composites are produced by infiltrating liquid Zr[sub 57]Nb[sub 5]Al[sub 10]CU[sub 15.4]Ni[sub 12.6] (Vit106) into tungsten reinforcements at 1150 and at 1425 K. X-ray diffraction, differential scanning calorimetry, and scanning electron...

  • Laser Fabrication of Glass Microstructures. Hansen, William; Fuqua, Pete; Livingston, Frank; Huang, Adam; Abraham, Meg; Taylor, Dave; Janson, Siegfried; Helvajian, Henry // Industrial Physicist;Jun/Jul2002, Vol. 8 Issue 3, p18 

    Explores the laser fabrication of glass microstructures. Approaches to laser microfabrication of glass materials; Amenability of photocerams to laser-photoactivated processing from devitrification; Development of mass-producible miniature satellites.

  • Formation kinetics of nanocrystalline FeBSi alloy by crystallization of the metallic glass. Tong, H.Y.; Ding, B.Z.; Jiang, H.G.; Lu, K.; Wang, J.T.; Hu, Z.Q. // Journal of Applied Physics;1/1/1994, Vol. 75 Issue 1, p654 

    In order to clarify the formation mechanism of extremely fine-grained microstructures by crystallization of the FeBSi metallic glass, the nucleation and crystal-growth rates have been determined. The results indicate that the parabolic growth rate increases with annealing temperature, showing a...

  • Flexible 3D deep microstructures of silica glass by laser-induced backside wet etching. Sato, Tadatake; Kurosaki, Ryozo; Narazaki, Aiko; Kawaguchi, Yoshizo; Niino, Hiroyuki // Applied Physics A: Materials Science & Processing;Nov2010, Vol. 101 Issue 2, p319 

    The well-controlled fabrication of microtrenches including inclined features using normal incidence with gradual shifting of the irradiated area was demonstrated. Based on the variation of trench width depending on the laser fluence, the existence of gaps between the edge of the irradiated area...

  • Glass and glass-ceramics in the La2O3-Gd2O3-PbO-MnO-B2O3 system. Raykov, R.; Staneva, A.; Dimitriev, Y.; Kashchieva, E.; Slavov, S.; Blagoev, B. // Physics & Chemistry of Glasses: European Journal of Glass Scienc;Aug2015, Vol. 56 Issue 4, p145 

    This study is a continuation of our previous research on the system La2O3-PbO-MnO-B2O3. The purpose is the production of glass-ceramic materials based on glasses in the system La2O3-Gd2O3-PbO-MnO-B2O3 containing (La1-xGdx)1-yPbyMnO3 crystalline particles. The studied compositions were located in...

  • More about Pressure Tanks, Especially of Those with Sight Glasses. Schmitt, John // National Driller;Jul2014, Vol. 35 Issue 7, p32 

    The author reports on handling pressure tanks with sight glasses.

  • Mg AZ80/SiC Composite Bars Fabricated by Infiltration of Porous Ceramic Preforms. Kevorkijan, V. // Metallurgical & Materials Transactions. Part A;Feb2004, Vol. 35 Issue 2, p707 

    Semi-industrial samples of Mg AZ80/SiC/50p composites (machined bars with o.d. = 80 mm and length = 150 mm, having a maximum 2 vol pct of retained porosity) were successfully fabricated by pressureless, low-pressure (under overpressure of about 0.3 MPa) and moderate-pressure (under overpressure...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics