TITLE

Application of Taguchi Method Machining to CuA1

AUTHOR(S)
Ibrahim, M. R.; Abdullah, Aznizam; Kadir, A.R Ab; Sulaiman, S.
PUB. DATE
May 2015
SOURCE
Applied Mechanics & Materials;2015, Vol. 789-790, p111
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This paper is to study the application of Taguchi Method when experimental cutting on Copper (CuA1) generated by a milling machine. The respone of this study is surface roughness while machining with varying machining parameters such as cutting speed, feed rate and depth of cut. This experiment is using end mill HSS Ø16mm with uncoated and 2 flute with sequences of experiment base on the Taguchi Orthogonal array L934 which carry out with 9 of experiments. The signal-to-noise (S/N) ratio, the analysis of variance (ANOVA) and confirmation tests with the optimal levels of machining parameters are carried out in order to illustrate the effectiveness of the Taguchi optimization method.
ACCESSION #
109300761

 

Related Articles

  • TURNING PARAMETER OPTIMIZATION FOR SURFACE ROUGHNESS OF ASTM A242 TYPE-1 ALLOYS STEEL BY TAGUCHI METHOD. Verma, Jitendra; Agrawal, Pankaj; Bajpai, Lokesh // International Journal of Advances in Engineering & Technology;Mar2012, Vol. 3 Issue 1, p255 

    The purpose of this research paper is focused on the analysis of optimum cutting conditions to get lowest surface roughness in turning ASTM A242 Type-1 ALLOYS STEEL by Taguchi method. Experiment was designed using Taguchi method and 9 experiments were conducted by this process. The results are...

  • Comparison of Design of Experiments via Traditional and Taguchi Method. Islam, M. N.; Pramanik, A. // Journal of Advanced Manufacturing Systems;Sep2016, Vol. 15 Issue 3, p151 

    This paper presents a case study on comparison of Design of Experiments (DOE) via traditional and Taguchi methods in terms of efficiency. First, a three-level, four-parameter, full factorial DOE was conducted for finding the effects of machining parameters on the surface roughness (arithmetic...

  • Optimization of wire Electrical Discharge turning operations using robust design of experiment. Mohammadi, Aminollah; Fadaei Tehrani, Alireza; Safari, Mahdi // AIP Conference Proceedings;1/17/2011, Vol. 1315 Issue 1, p1205 

    In the present study a multi response optimization method using Taguchi's robust design approach is proposed for wire electrical discharge turning (WEDT) operations. Experimentation was planned as per Taguchi's L18 orthogonal array. Each experiment has been performed under different machining...

  • FORECASTING OF OPTIMUM TURNING PARAMETER ON SURFACE ROUGHNESS IN TURNING OF AL-AL2O3 METAL MATRIX COMPOSITE. SINGH, YASHVIR; SINGH, NISHANT KUMAR; SINGLA, AMNEESH; LOHANI, NITIN // International Journal of Engineering Science & Technology;Feb2013, Vol. 5 Issue 2, p267 

    The objective of this research work is to apply taguchi method to investigate the effects of turning parameters such as cutting speed, depth of cut and feed rate on surface roughness, in Turning of Al-Al2O3 MMC using TiC coated HSS cutting tool. The Signal-to- Noise (S/N) ratio, the analysis of...

  • OPTIMIZATION OF HARD TURNING PROCESS PARAMETERS WITH PCBN TOOL BASED ON THE TAGUCHI METHOD. Puh, Franko; Šegota, Toni; Jurković, Zoran // Tehnicki vjesnik / Technical Gazette;Apr-Jun2012, Vol. 19 Issue 2, p415 

    In this paper, the Taguchi method is applied to find optimum process parameters for hard turning of hardened steel AISI 4142 using PCBN tool. Orthogonal design (L9 (34)), signal-to-noise ratio (S/N) and analysis of variance (ANOVA) are applied to study performance characteristics of cutting...

  • Sustainable machining of the magnesium alloy materials in the CNC lathe machine and optimization of the cutting conditions. Eker, Beril; Ekici, Bülent; Kurt, Mustafa; Bakır, Barkın // Mechanika;2014, Vol. 20 Issue 3, p310 

    In this study, MQL turning performance was compared to dry conditions. The magnesium based material will be formed by applying the orthogonal cutting. The CNC Lathe shall be used for both cutting processes. The experiment used MINITAB 16 software to establish the experiment plan. In this study,...

  • ANALYSIS OF SURFACE ROUGHNESS IN HARD TURNING BY USING TAGUCHI METHOD. SALVI, S. B.; DESHMUKH, R. R.; DESHMUKH, S. D. // International Journal of Engineering Science & Technology;Feb2013, Vol. 5 Issue 2, p365 

    Hard turning is defined as the turning of hardened ferrous metals with Rockwell-C hardness ratings ranging from 45 to 70. Hard turning has the potential to reduce production costs by replacing more costly and less agile grinding operations on hard materials especially in finishing processes...

  • Optimization of Cutting Parameters to Minimize the Surface Roughness in the End Milling Process Using the Taguchi Method. Ribeiro, João; Lopes, Hernâni; Queijo, Luis; Figueiredo, Daniel // Periodica Polytechnica: Mechanical Engineering;2017, Vol. 61 Issue 1, p30 

    This paper presents a study of the Taguchi design application to optimize surface quality in a CNC end milling operation. The present study includes feed per tooth, cutting speed and radial depth of cut as control factors. An orthogonal array of L9 was used and the ANOVA analyses were carried...

  • Optimization of Surface Roughness in Wet Turning Operation of High Carbon High Chromium Steel. Davis, Rahul; Alazhari, Mohamed; Zubir, Abdurahman H. A. // International Review of Mechanical Engineering;Mar2013, Vol. 7 Issue 3, p495 

    In order to control the required surface quality, generally it is vital to have the choice of optimized cutting factors in various industrial machining operations. The trait of surface finish is a vital concern for most of the turned parts in an industry. The present research work is focused on...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics