TITLE

SENSORS AND THEIR CLASSIFICATION IN THE FUSION WELDING TECHNOLOGY

AUTHOR(S)
Garašić, Ivica; Kožuh, Zoran; Remenar, Maja
PUB. DATE
July 2015
SOURCE
Tehnicki vjesnik / Technical Gazette;Jul/Aug2015, Vol. 22 Issue 4, p1069
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In this paper the most commonly used sensing systems in modern welding industry, which nowadays includes robotic systems, are listed and analysed. According to mechanisms of action and measured parameters, several classifications of sensor systems are presented. MIG/MAG, resistance and laser beam welding processes are the most commonly robotized ones in the industry and therefore special attention is given to them. Several characteristics, limitations and advantages of sensor systems are presented and mechanisms of action are briefly described.
ACCESSION #
109281383

 

Related Articles

  • Single-Pass Laser Beam Welding of Clad Steel Plate. Missori, S.; Murdolo, F.; Sili, A. // Welding Journal;Feb2004, Vol. 83 Issue 2, WELDING RESEARCH. p65S 

    Examines the single-pass laser beam welding of clad steel plate and explores the possibility of a satisfactory composition and crack-free weld metal. Overview of the edge preparations and welding processes; Specifications and chemical composition of plates and filler metals from Maker...

  • Effects of Laser Parameters on Porosity Formation: Investigating Millimeter Scale Continuous Wave Nd:YAG Laser Welds. NORRIS, J. T.; ROBINO, C. V.; HIRSCHFELD, D. A.; PERRICONE, M. J. // Welding Journal;Oct2011, Vol. 90 Issue 10, p198.s 

    Porosity formation in milliscale partial penetration Nd:YAG laser keyhole mode welds is not well understood. Prior investigations of weld porosity examining the relationship between process parameters and laser keyhole stability have largely been qualitative and mostly focused on welds outside...

  • MATHEMATICAL MODELING FOR MELTED ZONE IN LASER WELDING FOR STEEL. MÎNZAT, Cristian; BOBOESCU, Remus // Proceedings of the Scientific Conference AFASES;May2012, p711 

    On the thick carbon steel plates were made welds with Nd:YAG laser beam. Weld width and crater obtained at stopping irradiation characterize the weld surface. It presents mathematical models that show the effect of power, welding speed and laser beam defocusing on these sizes. The hierarchy of...

  • Deep Penetration Welding of Ti-6Al-2Zr- 1Mo-1V with a Fibre Laser. OU, W.-M.; ZHAN, X.-H.; WEI, Y.-H.; MI, G.-Y.; GU, C. // Lasers in Engineering (Old City Publishing);2016, Vol. 33 Issue 1-3, p103 

    The investigation laser beam welding (LBW) for Ti-6Al-2Zr-1Mo-1V with fibre laser has been carried out. The results of LBW show that the weld bead without defects could be obtained. In order to determine the factor which takes most important position to affect the depth and quality, the welding...

  • RESIDUAL STRESS DISTRIBUTIONS IN FERRITIC TO AUSTENITIC STEEL JOINTS MADE BY LASER WELDING. Iordachescu, M.; Ruiz-Hervias, J.; Luzin, V.; Scutelnicu, E.; Valiente, A.; Ocaña, J. L. // Annals of the University 'Dunarea de Jos' of Galati: Fascicle XI;2013, Vol. 24, p45 

    In this study, autogenous laser welding was used to join thin plates of low carbon ferritic and austenitic stainless steel. Due to the differences in the thermo-physical properties of base metals, this kind of weld exhibits a complex microstructure, which frequently leads to an overall loss of...

  • Modeling of the compressible vapor flow induced in a keyhole during laser welding. Amara, E. H.; Fabbro, R.; Bendib, A. // Journal of Applied Physics;4/1/2003, Vol. 93 Issue 7, p4289 

    The compressible vapor flow inducing a keyhole in the deep penetration laser welding process is studied. Suitable boundary conditions are deduced by the mean of a ray-tracing procedure, and the finite volume method is used to solve the hydrodynamic equations governing the vapor flow. A...

  • Location and Occurrence of Fusion Welding Discontinuities.  // Welding Journal;Nov2013, Vol. 92 Issue 11, p168 

    The article presents information on fusion welding.

  • Researchers laser-weld transparent polymers.  // Machine Design;4/21/2011, Vol. 83 Issue 7, p19 

    The article reports that researchers at the Fraunhofer Institute for Laser Technology have developed a way to laser-weld transparent plastic components together without using the infrared absorbers used in other laser-welding attempts.

  • A golden opportunity. Piccinno, Giuliano // Industrial Laser Solutions;Jul2003, Vol. 18 Issue 7, p18 

    Focuses on the use of Nd:YAG laser welding techniques for the volume production of gold jewelry chains. Ability of the technique to form fully assembled products; Fairness of the typical beam quality produced by the technique; Success of the technique to stimulate laser manufacturers to invent...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics