TITLE

Corrosion inspection method of steam generator tubes using acoustic emission technique

AUTHOR(S)
Hou, S.; Luo, J.; Shen, T.; Xu, J.
PUB. DATE
May 2015
SOURCE
Materials Research Innovations;May2015 Supplement s5, Vol. 19, pS5-1237
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Acoustic emission technique has been applied as the real-time and non-destructive inspection of corrosion on steam generator tubes. The corrosion signals gathered about steam generator tubes in service have been analysed. The detailed analysis reveals that the crack development of the heat transfer tubes has three stages. The results show that the accuracy of this method is comparable to the one of microscope examination.
ACCESSION #
102959373

 

Related Articles

  • Three-parameter Weibull distribution model for tensile strength of GFRP bars based on experimental tests. Tu, J. W.; Guo, D. L.; Mei, S. T.; Jiang, H. C.; Li, X. P. // Materials Research Innovations;May2015 Supplement s5, Vol. 19, pS5-1191 

    Concrete structures with fibre-reinforced plastic bars can solve steel corrosion problems very effectively. At present, glass fibre-reinforced plastic bars are more widely used among fibre-reinforced plastic bars. Different from steel bars, glass fibre-reinforced plastic bars have no yield stage...

  • The irresistible rise of composites. Reux, Frédéric // JEC Composites Magazine;Apr/May2012, Issue 72, p3 

    In the article, the author notes that several initiatives involving the use of composite materials, particularly carbon fiber reinforced composites in the automotive industry, were seen in the 2012 JEC Europe show. The author mentions that the growing use of composite materials in automotive and...

  • Bearing Capacity Calculation and Fiber-reinforced Polymer Repair of Corroded Beam-slabs in a Wharf. XIE, Y. F.; FAN, Y.; WANG, J. Y. // Journal of Residuals Science & Technology;2016 Supplement 2, Vol. 13, pS141 

    Corrosion of steel reinforcement bars is a common problem for high-pile wharf in service, with the aim of solving this problem, a method to calculate the actual bearing capacity of corroded beam-slabs is proposed, in which the rate of loss of area and the reduction in strength of steel bars due...

  • Carbon nano-capsule coating for high-power LED thermal management. Han, X.; Cui, X.; Ma, K.; Deng, G. // Materials Research Innovations;May2015 Supplement s5, Vol. 19, pS5-1112 

    The thermal radiation performance and mechanism of a carbon nano-capsule coating were analysed in this paper for the thermal management of high-power light-emitting diode. The coating was made by adding carbon nanospheres to a resin base. The micro-morphology was observed, and the thickness and...

  • Development of scientific investigations in the field of corrosion and corrosion protection of materials in Ukraine. Pokhmurs’kyi, V. // Materials Science;Sep2008, Vol. 44 Issue 5, p609 

    The article discusses various studies that investigate the corrosion and corrosion protection of materials in Ukraine. The study conducted by researchers headed by H. V. Samsonov, I. M. Fedorchenko and other experts in the field of development of new composite materials and coating is cited....

  • Electrical properties of EVA filled by zinc powder. Subiela, J. R.; López, J.; Balart, R.; García-Jareño, J. J.; Vicente, F. // Journal of Materials Science;Oct2006, Vol. 41 Issue 19, p6396 

    Elastic composites of zinc powder directly dispersed within an EVA (ethylene-vinyl acetate) matrix were prepared by a hot plates procedure. Conductance of samples depends on the filler content in three different regimes: polarization, tunnelling effect and percolation. The surface corrosion was...

  • PROSPECTS AND CHALLENGES OF COMPOSITES IN A DEVELOPING COUNTRY. Haruna, V. N.; Abdulrahman, A. S.; Zubairu, P. T.; Isezuo, L. O.; Abdulrahman, M. A.; Onuoha, D. C. // Journal of Engineering & Applied Sciences;Jul2014, Vol. 9 Issue 7, p1069 

    In spite of the tremendous progress that has been made in the discipline of material science and engineering, there still remain technological challenges, including the development of even more sophisticated and specialized materials such as composite materials. This research is geared towards...

  • The kinetics of corrosion of E-glass fibres in hydrochloric acid. Jones, R. L.; Betz, D. // Journal of Materials Science;Sep2004, Vol. 39 Issue 18, p5633 

    The corrosion of glass fibres in acid solution is well known and is thought to be responsible for many instances of failure in glass reinforced plastic materials. Although it is generally accepted that cations are leached from the glass matrix into the acid solution, the precise chemical...

  • Synthesis-microstructure-mechanical properties-wear and corrosion behavior of an Al-Si (12%)—Flyash metal matrix composite. Ramachandra, M.; Radhakrishna, K. // Journal of Materials Science;Nov2005, Vol. 40 Issue 22, p5989 

    In the present investigation, Aluminium based metal matrix composite containing up to 15% weight percentage of flyash particulates were successfully synthesized using vortex method. The properties like density, hardness, microhardness, ductility and ultimate tensile strength were investigated....

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics