Krulakova, Maria; Lazarova, Edita; Krupa, Vitazoslav; Ivanicova, Lucia
March 2014
Proceedings of the International Multidisciplinary Scientific Ge;2014, Vol. 2, p691
Conference Proceeding
The paper describes our experience with the modelling of TBM performance prediction using the algorithms developed by Matlab programming. The results were verified on real data from TBM excavation. The Matlab software was used for development of programs for processing and analysis of monitored data recorded during the TBM excavation of exploratory tunnels Branisko and Visnove in Slovakia. Application of such programs should provide real-time parameters applicable for the control and optimization of the TBM excavation process. The paper also delivers the results and algorithms of fully automated scanning control of large-scale maps using the camera Canon G9 and Matlab programming for further digitization of geological/geotechnical mapping.


Related Articles

  • DIFFERENCES IN DETERMINATION OF GEOTECHNICAL PARAMETERS IN SLOVAKIA AND POLAND. Giang Nguyen // Proceedings of the International Multidisciplinary Scientific Ge;2014, Vol. 2, p299 

    The paper deals with some differences in determination of soils shear strength parameters and deformation characteristics in Slovakia and Poland. Poorly-graded sand (SP) and clay of high plasticity (CH) as subsoil in an area of industrial and technology park belonging to territory of town...

  • HIGHWAY DAMAGES IN VIETNAM DUE TO GEOTECHNICAL CAUSES AND TECHNICAL SOLUTIONS TO AVOID THEM. Giang Nguyen // Proceedings of the International Multidisciplinary Scientific Ge;2014, Vol. 2, p457 

    The paper deals with damages of highway section Ho Chi Minh City - Trung Luong in South Vietnam due to geotechnical causes. Main damages are located in places next to culverts and bridges abutments which are founded on piles while embankments next to them are founded on soft soils. The reasons...

  • People are Looking Up! Cheves, Marc // American Surveyor;2013, Vol. 10 Issue 11, p4 

    The author reflects on the continued strength of the American surveying industry as represented by the success of the Intergeo 2013 held on October 8-10, 2013 in Essen, Germany. He states that the event is helpful in presenting ways on how to make money with geotechnology. An overview on product...

  • GEOTECHNICAL DESIGN AND MONITORING OF A DEEP EXCAVATION. COMPARISON BETWEEN MEASUREMENTS AND CALCULATION. Popa, H.; Batali, L.; Manea, S. // Proceedings of the International Multidisciplinary Scientific Ge;2014, Vol. 2, p417 

    Designing high buildings, with 10 - 20 stories aboveground and several underground stories in dense urban areas supposes deep excavation enclosures, having neighboring structures at the property limit. Designing and building such works imply a series of activities which have to be lead and...

  • THE INFLUENCE OF GEOTECHNICAL INVESTIGATIONS MAGNITUDE ON CHARACTERISTIC VALUES OF SOILS PARAMETERS. Olinic, Ernest // Proceedings of the International Multidisciplinary Scientific Ge;2014, Vol. 2, p915 

    The main purpose of the geotechnical studies is to determine the physical and mechanical properties of the foundation soil. According to European regulations, geotechnical design shall be based on design values of geotechnical parameters derived from the characteristic values which are directly...

  • NEW TECHNOLOGIES IMPLEMENTED IN GEOTECHNICAL MONITORING ON TRANSPORT CONSTRUCTIONS. DRUSA, Marian; CHEBEŇ, Vlastimil; BULKO, Roman // Proceedings of the International Multidisciplinary Scientific Ge;2014, Vol. 2, p651 

    A new route of D1 motorway in the north of Slovakia must across territory with high susceptibility to landslide movements. Several slope deformations with different activity were identified in the studied area of Šútovo and Kraľovany landslide [2], [8]. Due to narrow valley relief,...

  • CONCEPT OF FIBRE OPTICS GEOTECHNICAL DEFORMATION MONITORING AND IN-SITU DEPLOYMENT IN OPEN CAST MINE. Zalesky, Jan; Capova, Kristyna; Zalesky, Marek // Proceedings of the International Multidisciplinary Scientific Ge;2014, Vol. 2, p179 

    The paper presents a concept of Fiber Bragg Grating sensors (FBG) and Brillouin Optical Time Domain Reflectometry (BOTDR) application for deformation monitoring on a side slope of an open cast mine. The fiber optics measurement techniques, instruments of our own construction and methods of...

  • VIBRATION MONITORING AS A TOOL FOR A CALIBRATION OF GEOTECHNICAL TECHNOLOGIES. Rybak, Jaroslaw; Pieczynska-Kozlowska, Joanna // Proceedings of the International Multidisciplinary Scientific Ge;2014, Vol. 2, p1043 

    Economic progress observed in recent years triggered the need for the expansion of transportation infrastructure as well as the growing interest in the land located in close proximity to already existing buildings. Erecting new buildings within compact housing imposes on the investors the...

  • DESIGNING A RESEARCHER. Rakic, Dragoslav; Sisic, Rijad; Papic, Jovan Br.; Zafirovski, Zlatko // Proceedings of the International Multidisciplinary Scientific Ge;2013, p399 

    Several faculties in the Western Balkans countries have study programs treating geotechnology. As they are very similar and there are almost no language barriers, there are no difficulties for cooperation. This was starting point for academic members of these faculties when deciding to organize...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics