TITLE

Study of Phase Distribution of a Liquid-Solid Circulating Fluidized Bed Reactor Using Abductive Network Modeling Approach

AUTHOR(S)
Razzak, Shaikh A.
PUB. DATE
December 2013
SOURCE
Chemical Product & Process Modeling;Dec2013, Vol. 8 Issue 2, p77
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
No abstract available.
ACCESSION #
100884860

 

Related Articles

  • Experimental and CFD study on the hydrodynamic characters of dense liquid-solid fluidized bed. Liu, Guodong; Lu, Huilin; Wang, Peng; Tang, Si; Wang, Shuai // AIP Conference Proceedings;Jul2013, Vol. 1547 Issue 1, p328 

    In a recent study the bed expansion height and liquid phase velocity was measured for liquid-solid fluidized bed with 0.10 m in diameter and 1.037m in height. Liquid flow velocity measurements were performed using the ultrasonic technique. Measurements of the bed expansion height were conducted...

  • Liquid-solid Coupling Characteristics in the Fluidized Bed Evaporator for Tobacco Refined Liquid. Feng-Ian Wang; Yuan-jun Yao; Fa-yun Gong; Fang-ping Ye; Wen-jie Ql // Applied Mechanics & Materials;2014, Issue 686, p522 

    Consider a two-phase liquid-solid coupling effect, using Euler - Euler two-fluid model is solved using standard viscous term with k-ε model and the velocity pressure coupling a simple algorithm to simulate liquid-solid two-phase flow characteristics of the fluid flow method bed, the...

  • Liquid-solid Coupling Characteristics in the Fluidized Bed Evaporator for Tobacco Refined Liquid. Feng-lan Wang; Yuan-jun Yao; Fa-yun Gong; Fang-ping Ye; Wen-jie QI // Applied Mechanics & Materials;2014, Issue 682-686, Special section p522 

    Consider a two-phase liquid-solid coupling effect, using Euler - Euler two-fluid model is solved using standard viscous term with k-ε model and the velocity pressure coupling a simple algorithm to simulate liquid-solid two-phase flow characteristics of the fluid flow method bed, the...

  • Viscosity Effects on Solid Circulation Rate in a Liquid Solid Circulating Fluidized Bed. Gnanasundaram, Nirmala; Loganathan, Muruganandam; Perumal, Kumar // Journal of Applied Sciences;2014, Vol. 14 Issue 10, p1037 

    Liquid-solid circulating reactors form the heart of emerging alkylation processes for the production of motor fuel additives and also for the manufacture of linear alkyl benzene. To design a liquid-solid circulating fluidized bed system hydrodynamics be studied first but there is still limited...

  • DESIGN OF A FAST INTERNAL CIRCULATING FLUIDIZED BED GASIFIER WITH A CONICAL BED ANGLE. MELE, Jernej; SENEGAČNIK, Andrej // Thermal Science;2019, Vol. 23 Issue 1, p33 

    The main purpose of a fast internal circulating fluidized bed gasifier is the steam reforming of solid organic matter, like biomass, to a nearly nitrogen-free syngas. The calorific value of this syngas is approximately three times higher than the gas from common air-driven gasifiers. This...

  • Study of hydrodynamic characteristics in a circulating fluidized bed gasifier for plastic waste by computational fluid dynamics modeling and simulation. Lee, Ji; Choi, Hang; Seo, Yong // Journal of Material Cycles & Waste Management;Oct2014, Vol. 16 Issue 4, p665 

    For designing an efficient circulating fluidized bed reactor, understanding the complex hydrodynamic characteristics in the reactor is required. Hence, in the present study, the modeling and simulation of the circulating fluidized bed gasifier using plastic waste were carried out with...

  • A numerical study of bed expansion in supercritical water fluidized bed with a non-spherical particle drag model. Lu, Youjun; Wei, Liping; Wei, Jinjia // Chemical Engineering Research & Design: Transactions of the Inst;Dec2015, Vol. 104, p164 

    Supercritical water (SCW) fluidized bed is a novel biomass gasification reactor which uses SCW as fluidized medium and non-spherical particles as bed materials. In this paper, a new non-spherical particle drag model was developed for the sphericity between 0.6 and 1. The drag model was applied...

  • Modeling of a fluidized bed propylene polymerization reactor operated in condensed mode. Utikar, Ranjeet P.; Harshe, Yogesh M.; Mehra, Anurag; Ranade, Vivek V. // Journal of Applied Polymer Science;May2008, Vol. 108 Issue 4, p2067 

    The article discusses research done on the operation of a fluidized bed propylene polymerization reactor in condensed mode. One of the commercially used processes for the production of polypropylene (PP) is the gas-phase polymerization. Modeling the reactor may influence the operating parameters...

  • Advanced Control of a Fluidized Bed Using a Model-predictive Controller. Ibrehem, Ahmmed S.; Hussain, Mohamed Azlan; Ghasem, Nayef M. // Australian Journal of Basic & Applied Sciences;2009, Vol. 3 Issue 4, p3954 

    The control of fluidized-bed processes remains an area of intensive research due to their complexity and the inherent nonlinearity and varying operational dynamics involved. There are a variety of problems in chemical engineering that can be formulated as Nonlinear Programming (NLP) problems....

  • Artificial Neural Network Modeling of an Inverse Fluidized Bed Bioreactor. Rajasimman, M.; Govindarajan, L.; Kathikeyan, C. // International Journal of Environmental Research;2009, Vol. 3 Issue 4, p575 

    The application of neural networks to model a laboratory scale inverse fluidized bed reactor has been studied. A Radial Basis Function neural network has been successfully employed for the modeling of the inverse fluidized bed reactor. In the proposed model, the trained neural network represents...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics