CFD Modeling and Experimental Study of a Spray Dryer Performance

Sadripour, Maryam; Rahimi, Amir; Hatamipour, Mohammad Sadegh
June 2014
Chemical Product & Process Modeling;Jun2014, Vol. 9 Issue 1, p15
Academic Journal
No abstract available.


Related Articles

  • KURUTMA TEKNİǦİNDE AKIÅžKAN YATAK UYGULAMASININ DENEYSEL OLARAK Ä°NCELENMESÄ°. Kaya, Metin; Kurt, Hüseyin // Teknoloji;Sep-Dec1999, Vol. 2 Issue 3/4, p1 

    Drying is a humidity or liquid removal process from a material by evaporation process. This technique is widely used in food drying applications. In this process, the heat for evaporation is transferred to the material to be dried. In drying, there are already developed drying systems and some...

  • Prediction of regions of coalescence and agglomeration along a spray dryer—Application to skim milk powder. Malafronte, L.; Ahrné, L.; Innings, F.; Jongsma, A.; Rasmuson, A. // Chemical Engineering Research & Design: Transactions of the Inst;Dec2015, Vol. 104, p703 

    Spray drying is a well-established method used in the food industry for production of powders, such as dry milk, coffee, tea, and soup. The operating conditions of spray dryers depend on the product and chamber design. Thus scaling up the process is complex, and simulation tools are needed to...

  • A User-Friendly Model for Spray Drying to Aid Pharmaceutical Product Development. Grasmeijer, Niels; de Waard, Hans; Hinrichs, Wouter L. J.; Frijlink, Henderik W. // PLoS ONE;Sep2013, Vol. 8 Issue 9, p1 

    The aim of this study was to develop a user-friendly model for spray drying that can aid in the development of a pharmaceutical product, by shifting from a trial-and-error towards a quality-by-design approach. To achieve this, a spray dryer model was developed in commercial and open source...

  • Investigation of Jet Break-Up Process in Diesel Engine Spray Modelling. Djavareshkian, M. H.; Ghasemi, A. // Journal of Applied Sciences;2009, Vol. 9 Issue 11, p2078 

    The objective of this study, is to simulate spray flow with different break-up models and investigate the processes of spray breakup and mixture formation. Effect of these models on the DI diesel engine combustion and performance is also investigated. The 3 Dimensional Naiver-Stokes equation is...

  • A review paper on Simulation and modeling of combustion characteristics under high ambient and high injection of biodiesel combustion. Andsaler, Adiba Rhaodah; Khalid, Amir; Ramsy, Him; Jaat, Norrizam // Applied Mechanics & Materials;2015, Vol. 773-774, p580 

    Diesel engine performance and emissions is strongly couple with fuel atomization and spray processes, which in turn is strongly influenced by injector flow dynamics. This paper describes simulation of combustion characteristics under high ambient and high injection of biodiesel combustion by...

  • Effect Excess Air As An Oxidizer In The Flame Assisted Spray Dryer Using Computational Fluid Dynamics Approach. Septiani, Eka Lutfi; Widiyastuti, W.; Nurtono, Tantular; Winardi, Sugeng // AIP Conference Proceedings;2016, Vol. 1710 Issue 1, p1 

    The size distribution of silica particles as a model material from colloidal silica solution precursor in the flame assisted spray dryer method were studied numerically using Computational Fluid Dynamics (CFD). CFD has ability to solve the momentum, energy and mass transfer equation well. k-e...

  • TUNING AND VALIDATION OF A DIESEL SPRAY MODEL. Senčić, Tomislav; Lucchini, Tommaso; Mrzljak, Vedran // Transactions of FAMENA;2010, Vol. 34 Issue 4, p47 

    A spray model has been implemented in the OpenFOAM CFD toolkit. A set of constant volume chamber injection simulations has been performed in order to analyze the influence of the spray model constants. In the performed analysis, a set of model constants was selected and the simulation results...

  • A CFD Study of the Air Distribution at Non-Conventional Dryers Using Different Configurations of Mini Pipes. Silvério, B. C.; Resende, I. A.; Santos, D. B.; Duarte, C. R.; Barrozo, M. A. S. // Materials Science Forum;2014, Vol. 802, p203 

    Rotary dryers are a significant capital item for many industrial plants. Many potential benefits can be obtained through a greater understanding of the rotary drying process. In order to improve drying efficacy, a novel version of the rotary dryer, known as the rotoaerated dryer, was evaluated...

  • Evaluation of Spray Drying Behavior by Model Simulation. CHAVES, Diego Henrique de Souza; BIRCHAL, Marco Aurélio de Souza; BIRCHAL, Viviane Santos // Applied Mechanics & Materials;2015, Vol. 798, p175 

    This works presents a steady state behavior modeling and simulation study of spray dryer operational parameters and their influence on final product. Experimental data of skim milk drying was used to validate the simulator. However, the model is general and can be used for other materials of...

  • Simulation and Control of Spray Drying Using Nozzle Atomizer Spray Dryer. Tan, L. W.; Taip, F. S.; Aziz, N. Abdul // International Journal of Engineering & Technology;Dec2009, Vol. 9 Issue 10, p12 

    Spray drying is a commonly used method of drying a liquid feed through a hot gas. This study aims to obtain the empirical model of the spray drying process of full cream milk using a nozzle atomizer spray dryer, Lab-Plant SD 05 Laboratory Scale Spray Dryer. Inlet air temperature was chosen as...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics