Obtainment of a NiCrNbC Alloy by Mechanical Alloying

da Silva, Alisson K.; Cintho, Osvaldo M.; Capocchi, José D. T.
July 2014
Materials Science Forum;2014, Vol. 802, p35
Academic Journal
The present work investigate the possibility of obtainment by mechanical alloying of Ni superalloys based on the Ni-Cr-Nb-C system strengthened by γ"(Ni3Nb), since γ"(Ni3Nb) as γ' (Ni3Al) are typical coherent phase strengthening mechanisms in nickel superalloys. In order to evaluate this possibility, a composition with 71,65wt%Ni, 7,90wt%Cr, 20,00wt%Nb and 0,45wt%C was processed in a SPEX mill by 8 hours, consolidated and sintered at different temperatures (1200°C, 1250°C and 1300°C). The powder processed by MA and the sintered products were characterized by x-ray diffraction, SEM and EDS.


Related Articles

  • An online optical system for inspecting tool condition in milling of H13 tool steel and IN 718 alloy. Li, W.; Singh, H.; Guo, Y. // International Journal of Advanced Manufacturing Technology;Jul2013, Vol. 67 Issue 5-8, p1067 

    Tool wear adversely affects surface integrity due to higher cutting forces and temperatures. However, an accurate and efficient tool wear measurement is a challenging problem. The traditional direct tool wear measurement methods such as optical microscope and scanning electron microscope (SEM)...

  • Review of RF patents for refractory inventions.  // Refractories & Industrial Ceramics;Sep2012, Vol. 53 Issue 3, p212 

    No abstract available.

  • Introduction. Takahashi, Yukio // Materials at High Temperatures;Nov2012, Vol. 29 Issue 4, p279 

    An introduction is presented in which the author discusses various papers published within the issue on topics including the nickel-base superalloys, the strength of an interface between substrates and coated layers, and creep-fatigue strength of solders.

  • Metastability of structure and radiation resistance of nickel-chromium alloys. Votinov, S.; Kolotushkin, V. // Metal Science & Heat Treatment;Jan2006, Vol. 48 Issue 1/2, p36 

    The structure and phase changes in alloys based on nickel and chromium are analyzed under the conditions of operation of water-moderated reactors. It is shown that the changes in the structure and in the phase composition, the electrical resistance, and the lattice parameter depend on the...

  • Modeling of flow stress constitutive behavior of GH2984 superalloy for the prospective 700 °C fossil power plant. Jia, Peng; Wang, Engang; He, Jicheng // AIP Conference Proceedings;May2013, Vol. 1532 Issue 1, p427 

    Due to its excellent creep rupture strength and low cost, superalloy GH2984 has becoming a promising material to be used as heat exchanger in the prospective 700 °C fossil power plant. The mechanical response of the material under various forming conditions, which is a particularly important...

  • Shock induced reaction to refractory metal disilicides from MA precursor. Aizawa, Tatsuhiko; Ichige, Ken-Ichi; Syono, Yasuhiko // AIP Conference Proceedings;2000, Vol. 505 Issue 1, p759 

    Full shock reactivity into refractory metal disilicides can be attained when starting from the pretreated elemental powder compact or the mechanical alloying precursors. This shock induced reactivity is strongly dependent on the premixing state in the precursor. Mo-2Si is employed to describe...

  • Heat Input and the Liquation Cracking of Laser Welded IN738LC Superalloy. MONTAZERI, M.; GHAINI, F. MALEK; OJO, O. A. // Welding Journal;Sep2013, Vol. 92 Issue 9, p258-s 

    The effects of welding heat input on the heat-affected zone (HAZ) liquation cracking behavior in low power pulsed, laser-welded, IN738LC nickel-based superalloys were studied in both conduction and keyhole modes. The HAZ cracks observed in this study were intergranular liquation cracks...

  • Sintered Materials Based on Copper and Alumina Powders Synthesized by a Novel Method. Korać, M.; Kamberović, Ž.; Andjić, Z.; Filipović, M.; Tasić, M. // Science of Sintering;Jan2010, Vol. 42 Issue 1, p81 

    This paper presents the production of sintered materials from nano-composite powders obtained by a novel synthesis method, which represents a combination of thermochemical synthesis and mechanical alloying. Produced powders were characterized by an average individual particle size of 30nm, with...

  • Synthesis of Chromium-Nickel Nanoparticles Prepared by a Microemulsion Method and Mechanical Milling. Ban, Irena; Stergar, Janja; Drofenik, Miha; Ferk, Gregor; Makovec, Darko // Acta Chimica Slovenica;2013, Vol. 60 Issue 4, p750 

    A chemical and a physical method have been applied for the preparation of chromium-nickel alloy nanoparticles. The- I se particles were designed to be used for controlled magnetic hyperthermia applications. Microemulsions with Ni2+ and Cr3+ and/or NaBH4 as precursors were prepared using the...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics