TITLE

Simulation of Composite Materials by a Network FEM with Error Control

AUTHOR(S)
Eigel, Martin; Peterseim, Daniel
PUB. DATE
January 2015
SOURCE
Computational Methods in Applied Mathematics;2015, Vol. 15 Issue 1, p21
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
No abstract available.
ACCESSION #
100237459

 

Related Articles

  • Development of a Neural Network Simulator for Studying the Constitutive Behavior of Structural Composite Materials. Hyuntae Na; Seung-Yub Lee; Üstündag, Ersan; Ross, Sarah L.; Ceylan, Halil; Gopalakrishnan, Kasthurirangan // ISRN Materials Science;2013, p1 

    This paper introduces a recent development and application of a noncommercial artificial neural network (ANN) simulator with graphical user interface (GUI) to assist in rapid data modeling and analysis in the engineering diffraction field. The real-time network training/simulation monitoring...

  • Influence of Geometrical Factors on Performance of Thermoelectric Material Using Numerical Methods. Derebasi, Naim; Eltez, Muhammed; Guldiken, Fikret; Sever, Aziz; Kallis, Klaus; Kilic, Halil // Journal of Electronic Materials;Jun2015, Vol. 44 Issue 6, p2068 

    Prediction of the performance of thermoelectric cooling material (figure of merit, ZT) was carried out by simulated results obtained from the finite element method (FEM) as a training dataset with an artificial neural network. A total of 87 input vectors for the ZT obtained from the four...

  • Inverse Problem Methodology for the Measurement of the Electromagnetic Parameters Using MLP Neural Network. Hacib, T.; Mekideche, M. R.; Ferkha, N. // International Journal of Computer, Information & Systems Science;2008, Vol. 2 Issue 3, p197 

    This paper presents an approach which is based on the use of supervised feed forward neural network, namely multilayer perceptron (MLP) neural network and finite element method (FEM) to solve the inverse problem of parameters identification. The approach is used to identify unknown parameters of...

  • Composite error prediction of multistage machining processes based on error transfer mechanism. Zhang, Genbao; Ran, Yan; Wang, Yang; Gao, Tian // International Journal of Advanced Manufacturing Technology;Jan2015, Vol. 76 Issue 1-4, p271 

    Nowadays, modern manufacturing enterprises are paying more and more attention to machining process quality control in order to ensure the product quality. Since machining quality fluctuation is performed as composite error, then error control is becoming the key point in product quality...

  • Automatic control of finite element models for temperature-controlled radiofrequency ablation. Haemmerich, Dieter; Webster, John G // BioMedical Engineering OnLine;2005, Vol. 4, p42 

    Background: The finite element method (FEM) has been used to simulate cardiac and hepatic radiofrequency (RF) ablation. The FEM allows modeling of complex geometries that cannot be solved by analytical methods or finite difference models. In both hepatic and cardiac RF ablation a common control...

  • MATERIAL COMPUESTO vs ACERO EN EL CONFORMADO DE UN ROTOR DE TURBINA HIDROELÉCTRICA - VENTAJAS EN SU UTILIZACIÓN. ARAMAYO, SERGIO A. OLLER; NALLIM, LIZ G.; MARTÍNEZ, SERGIO OLLER // Revista Iberoamericana de Ingenieria Mecánica;abr2012, Vol. 16 Issue 1, p3 

    This paper shows the structural design of a composite water current turbine rotor by the finite elements method (FEM) [1]. The mechanical and geometrical parameters involved in the design of this fiber reinforced composite material are fiber orientation, number of layers, stacking sequence and...

  • Manufacture of Green-Composite Sandwich Structures with Basalt Fiber and Bioepoxy Resin. Torres, J. P.; Hoto, R.; Andrés, J.; García-Manrique, J. A. // Advances in Materials Science & Engineering;2013, p1 

    Nowadays, there is a growing interest for the use and development of materials synthesized from renewable sources in the polymer composites manufacturing industry; this applies for both matrix and reinforcement components. In the present research, a novel basalt fibre reinforced (BFR) bioepoxy...

  • Characterization of 1-3 piezoelectric polymer composites -- a numerical and analytical evaluation procedure for thickness mode vibrations. Madhusudhana Rao, C. V.; Prasad, G. // Condensed Matter Physics;Apr2010, Vol. 13 Issue 1, p13703.1 

    Biomedical transducers widely employ piezoceramic polymer composites with 1-3 connectivity. The research is aimed at determining the effective material properties of these composites in the micrometer scale by simulation. Volume fraction of piezoceramic in the composite plays an important role...

  • Local monitoring of polymerization trend by an interdigital dielectric sensor. Sorrentino, L.; Bellini, C.; Capriglione, D.; Ferrigno, L. // International Journal of Advanced Manufacturing Technology;Jul2015, Vol. 79 Issue 5-8, p1007 

    Composite materials are increasingly used for advanced applications subjected to high standards of quality that can be guaranteed by sophisticated control systems of the production process. Quality is usually controlled by monitoring temperature inside the laminate, but some researches have also...

  • Prediction of limiting dome height using neural network and finite element method. Lin Wang; Lee, T. C. // International Journal of Advanced Manufacturing Technology;Feb2006, Vol. 27 Issue 11/12, p1082 

    Using neural network to predict limiting dome height (LDH) based on the result of finite element analysis is a high efficiency work in spite of little error. Finite element results are presented with different working condition parameters, such as material thickness, punch speed, friction...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics