TITLE

Simulation and Study of SPWM Variable-Frequency Drives of Asynchronous Motors Based on Aerostatic Guide Way

AUTHOR(S)
Long Wei; Liu Yan; Zhang xiao-long; Wang ting-you
PUB. DATE
July 2014
SOURCE
Advanced Materials Research;7/24/2014, Vol. 989-994, p2807
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The asynchronous motor is converted to a model similar to DC motor to control through coordinate transformation, and adopt SPWM inverter circuit, the motor runs with load implements ideal speed and steady operation, providing appropriate speed for aerostatic guide way. Realize simulation of asynchronous motor variable frequency speed regulation system by simulink.
ACCESSION #
100086691

 

Related Articles

  • Modelling and Simulation of the 150° Conduction Mode Quasi Space Vector PWM Inverter Fed Permanent Magnet Brushless DC Motor. Yossawee Weerakamhaeng // Applied Mechanics & Materials;2015, Vol. 781, p241 

    This paper presents an alternative space vector pwm scheme of 150° conduction mode for the three phase voltage source inverter(3PVSI) with the switching periods, of six switches, determined by the Quasi Space Vector(QSV) relevant to the rotor of the three phase Permanent Magnet Brushless...

  • Advanced Simulation Model of Five Phase PMBLDC Motor Drive for Low Power High Torque Applications. Inayathullaah, M. A.; Anita, R. // International Review on Modelling & Simulations;Oct2012, Vol. 5 Issue 5, p2136 

    This paper presents an advanced modelling, simulation and analysis of a low-power high-torque five phase permanent magnet brushless direct current (PMBLDC) motor drive. For achieving high torque density in the air gap, a 144° mode of excitation is used. The proposed model helps to determine...

  • High Performance Speed Control of Direct Current Motors Using Adaptive Inverse Control. Obeid Ahmed, Aamir Hashim // WSEAS Transactions on Systems & Control;Apr2012, Vol. 7 Issue 2, p54 

    At present, the control of a separately excited Direct Current (DC) motor is generally done by means of feedback. This paper proposes the speed control of a separately excited DC motor. The novelty of this paper lies in the application of Adaptive Inverse Control (AIC) for the speed control of a...

  • SPEED CONTROL OF SEPARATELY EXCITED DC MOTOR USING FUZZY NEURAL MODEL REFERENCE CONTROLLER. Hameed, Waleed I.; Mohamad, Khearia A. // International Journal of Instrumentation & Control Systems;Oct2012, Vol. 2 Issue 4, p27 

    Conventional controllers are generally used to control the speed of the separately excited DC motors in various industrial applications. It is found to be simple and high effective if the load disturbances is small. So the drawback of Conventional controllers when high load has been applied to...

  • PID Regulator Implementation for Electric Kart DC Motor Current Stabilization. Vitols, K.; Reinberg, N.; Galkin, I. // Electronics & Electrical Engineering;2012, Issue 119, p7 

    A kart equipped with two DC motors has to be controlled. Eachrear wheel has its own motor which is powered from individual battery pack. Buck converters are used to power the motors, additional boost converters are to be used for regenerative braking. Use of PID regulator with current feedback...

  • Parameter identification of a separately excited dc motor via inverse problem methodology. HADEF, Mounir; MEKIDECHE, Mohamed Rachid // Turkish Journal of Electrical Engineering & Computer Sciences;2009, Vol. 17 Issue 2, p99 

    Identification is considered to be among the main applications of inverse theory and its objective for a given physical system is to use data which is easily observable, to infer some of the geometric parameters which are not directly observable. In this paper, a parameter identification method...

  • Study on the Characteristics of Electronically Commutated Motor. Karaliunas, B. // Electronics & Electrical Engineering;2011, Issue 109, p31 

    The article presents the study on the electrically commutated DC motors or on the so called studies of the fields of application of brushless motors, considering their advantages and disadvantages. The computerized simulation model Matlab/Simulink of the characteristics of the EC motor was...

  • An improved particle swarm optimization algorithm used in brushless DC motor. SUN Yu-sheng; XUE He-jie // Journal of Zhengzhou University of Light Industry, Natural Scien;Jun2014, Vol. 29 Issue 3, p48 

    Aiming at overcoming the weak anti-jamming capability when brushless DC motor of electric vehicle runs under the base speed range, an improved particle swarm optimization (PSO) algorithm was designed, that is, by changing the learning factor and inertia weight to optimize quantitative factors,...

  • Active Disturbance Rejection Controller Design for Electric Vehicle Traction System. Yu-Min Wang; Qing Fan // Advanced Materials Research;2014, Vol. 953-954, p1406 

    In some low velocity electric vehicle system, Brushless DC motor is used for the main traction motor. However, the low-velocity stability should be guaranteed, especially with the suddenly-changing load, the velocity response should be more quick and the overshoot should be small, all of above...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics