January 2014
Noise & Vibration Bulletin;Jan2014, p16
An abstract of the article "Energy Harvesting With Piezoelectric Element Using Vibroacoustic Coupling Phenomenon" by Hiroyuki Moriyama is presented.


Related Articles

  • Inverse parameter-dependent Preisach operator in thermo-piezoelectricity modeling. Krejčí, Pavel; Monteiro, Giselle A. // Discrete & Continuous Dynamical Systems - Series B;Jul2019, Vol. 24 Issue 7, p3051 

    Hysteresis is an important issue in modeling piezoelectric materials, for example, in applications to energy harvesting, where hysteresis losses may influence the efficiency of the process.The main problem in numerical simulations is the inversion of the underlying hysteresis operator.Moreover,...

  • A utility piezoelectric energy harvester with low frequency and high-output voltage: Theoretical model, experimental verification and energy storage. Guangyi Zhang; Shiqiao Gao; Haipeng Liu // AIP Advances;2016, Vol. 6 Issue 9, p1 

    In this paper, a utility piezoelectric energy harvester with low frequency and highoutput voltage is presented. Firstly, the harvester's three theoretical models are presented, namely the static model, the quasi static model and the dynamic vibration model. By analyzing the influence of the mass...

  • Nanoscale piezoelectric vibration energy harvester design. Foruzande, Hamid Reza; Hajnayeb, Ali; Yaghootian, Amin // AIP Advances;2017, Vol. 7 Issue 9, p095122-1 

    Development of new nanoscale devices has increased the demand for new types of small-scale energy resources such as ambient vibrations energy harvesters. Among the vibration energy harvesters, piezoelectric energy harvesters (PEHs) can be easily miniaturized and fabricated in micro and nano...

  • Power Generating Tires Using Nano Fibers. Tripathi, Gaurav // International Journal of Scientific & Technology Research;Aug2013, Vol. 2 Issue 8, p172 

    Energy harvesting is one the major issue. As every particle in the world vibrate so they possess vibrational energy. This paper deal with conversion of vibrational energy which generate in car tires into the power which would be enough to charge car battery or even can run the car. This can be...

  • Improvement of Pyroelectric Cells for Thermal Energy Harvesting. Chun-Ching Hsiao; An-Shen Siao; Jing-Chih Ciou // Sensors (14248220);2012, Vol. 12 Issue 1, p534 

    This study proposes trenching piezoelectric (PZT) material in a thicker PZT pyroelectric cell to improve the temperature variation rate to enhance the efficiency of thermal energy-harvesting conversion by pyroelectricity. A thicker pyroelectric cell is beneficial in generating electricity...

  • Design and characterization of a fractal-inspired multi-frequency piezoelectric energy converter. Castagnetti, Davide // Frattura e Integrita Strutturale;2013, Issue 23, p87 

    A promising harvesting technique, in terms of simplicity and efficiency, is the conversion of ambient kinetic energy through piezoelectric materials. This work aims to design and investigate a piezoelectric converter conform to a fractal-inspired, multi-frequency structure previously presented...

  • Exploitation of a tristable nonlinear oscillator for improving broadband vibration energy harvesting. Zhou, Shengxi; Cao, Junyi; Lin, Jing; Wang, Zezhou // European Physical Journal - Applied Physics;Sep2014, Vol. 67 Issue 3, p00 

    Numerical and experimental investigations of a broadband vibration energy harvester with triple-well are presented. The nonlinear restoring force of the tristable oscillator is experimentally identified as a high order polynomial that depends on the relative spacing and locations of the magnets...

  • Piezoelectric performance analysis of the single-sided trapezoidal loop shaped piezoelectric cantilever beam. JIANG Bing; CHEN Hong; CHEN Lijuan; CAO Kun; YUAN Shuai; WANG Qiang // Applied Mechanics & Materials;2014, Issue 525, p320 

    In order to improve the energy harvesting efficiency of piezoelectric cantilever beam (PCB) in the environment. This paper presents a new type of piezoelectric cantilever beam which is the single-sided trapezoidal loop shaped PCB. By theory analysis, the equivalent circuit model was established,...

  • Piezoelectric Beam Length Optimization for Raindrop Energy Harvesting Application. Chin-Hong Wong; Dahari, Zuraini; Manaf, Asrulnizam Abd; Miskam, Muhamad Azman // Applied Mechanics & Materials;2014, Vol. 705, p247 

    The vibration energy harvesting from raindrop is an interesting and potential approach for future applications. This article presents the piezoelectric based beam length optimization for raindrop energy harvesting application. In this work, polyvinylidene fluoride (PVDF) is selected as...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics