TITLE

Self-aligned flexible all-polymer transistor: Ultraviolet printing

AUTHOR(S)
Hyewon Kang; Tae-il Kim; Lee, Hong H.
PUB. DATE
November 2008
SOURCE
Applied Physics Letters;11/17/2008, Vol. 93 Issue 20, p203308
SOURCE TYPE
Academic Journal
DOC. TYPE
Abstract
ABSTRACT
Flexible all-polymer transistor has received much attention because it is needed for the unique area of flexible circuits and displays, and the solution processing allowed with polymers would enable low-cost production. In this work, we introduce and utilize ultraviolet (UV) printing technique for the fabrication of flexible all-polymer transistor. The technique allows printing of submicron patterns of polymers without applying heat or pressure, requiring only UV light. The UV printing also allows self-aligned gate formation, which can be accomplished through a simple roll-to-roll printing. The electrical performance of the flexible transistor thus fabricated is better than that of the other flexible all-polymer transistors.
ACCESSION #
35514076

 

Related Articles

  • Organic transistor challenges amorphous silicon. Clery, Daniel // New Scientist;12/15/90, Vol. 128 Issue 1747, p24 

    Discusses how computer displays and flat-screen televisions may be controlled by electronics made from organic polymers in the future. Benefits of flexibility; Manufacturing costs; How French researchers make transistors out of polymers; Process.

  • Organic field effect transistors from triarylamine side-chain polymers. Hüttner, Sven; Sommer, Michael; Steiner, Ullrich; Thelakkat, Mukundan // Applied Physics Letters;2/15/2010, Vol. 96 Issue 7, p073503 

    We present a comparative study of organic field effect transistors (OFET) based on amorphous side-chain p-type polymers obtained from controlled radical polymerization. The side-chain moieties consist of different triarylamines such as triphenylamine, dimethoxytriphenylamine, and...

  • An improved process for fabricating high-mobility organic molecular crystal field-effect transistors. Micolich, A. P.; Bell, L. L.; Hamilton, A. R. // Journal of Applied Physics;Oct2007, Vol. 102 Issue 8, p084511 

    In this paper we present an improved process for producing elastomer transistor stamps and high-mobility organic field-effect transistors (FETs) based on semiconducting acene molecular crystals. In particular, we have removed the need to use a silanized Si wafer for curing the stamps and to...

  • Crystallization of a poly(ethylene-co-octene): I A precursor structure and two competing mechanisms. Häfele, A.; Heck, B.; Kawai, T.; Kohn, P.; Strobl, G. // European Physical Journal E -- Soft Matter;Feb2005, Vol. 16 Issue 2, p207 

    Observations of a sample of poly(ethylene-co-octene)in a polarizing optical microscope reveal peculiarities in its crystallization behavior. When cooled from the melt to a fixed crystallization temperature, at first a structure of diffuse appearance with variations on the length scale of...

  • Electrical conduction in light-emitting organic polymer Schottky diodes. Rahman, Faiz; Johnson, Nigel P.; Slight, Thomas // Journal of Applied Physics;12/15/2005, Vol. 98 Issue 12, p124504 

    Schottky metal-polymer diodes, fabricated with a light-emitting polyvinylene polymer, have been studied for their electrical conduction characteristics. Radiative recombination localized at electron injection sites is seen. Device degradation at high drive voltages was observed, together with a...

  • AEM with Improved injection molding processability and performance attributes. King, Douglas // Rubber World;Dec2008, Vol. 239 Issue 3, p26 

    The article offers information on ethylene acrylic elastomers (AEM), which are said to be used in many automotive applications. The trends of increasing temperatures under the hood, more aggressive automotive fluids, reduction in hydrocarbon emissions and longer part life led to an important...

  • PREPARATION AND SOME PROPERTIES OF MULTIBLOCK COPOLY(AMIDE-b-AMIDE)S. Ukielski, Ryszard; Piatek, Marta // Polimery;2005, Vol. 50 Issue 11/12, p793 

    The paper concerns the polymers built of oligoamide hard blocks and oligoamide soft blocks (KPAA, formula I). Oligo(laurolactam) (PA12) was used as hard block and the product of reaction of dimerized fatty acid and hexamethylene diamine (PA6,36) was used as a soft one. Effects of molar ratio of...

  • Study of Ageing Deterioration of Silicone Rubber Housing Material for Outdoor Polymer Insulators. Thong-om, S.; Payakcho, W.; Grasasom, J.; Marungsri, B. // World Academy of Science, Engineering & Technology;Aug2011, Issue 56, p533 

    This paper presents the experimental results of salt fog ageing test of silicone rubber housing material for outdoor polymer insulator based on IEC 61109. Four types of HTV silicone rubber sheet with different amount of ATH were tested continuously 1000 hours in salt fog chamber. By visual...

  • Certain viscoelastic properties of densely crosslinked polymers: theoretical calculation. Ulitin, N. V.; Deberdeev, T. R.; Deberdeev, R. Ya. // International Polymer Science & Technology;2013, Vol. 40 Issue 5, pT47 

    The authors previously proposed a mathematical model of the viscoelastic compliance of densely crosslinked polymers. In the present paper, the methodology for theoretical parametric identification of this model is shown, with subsequent prediction of the results of a thermomechanical experiment.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics